Samsung OfficeServ 7200 Programming Manual page 189

CHAPTER 2. MMC Programming
[510] SLI RING CADENCE
Provides the ability to customize the ring cadence for single line ports on a system-wide
basis. There are five cadences available.
Please call Technical Support before changing any cadences as some peripheral sys-
tems may require default settings.
No
1 STN RING
2 TRK RING
3 DOOR RING
4 ALM RING
5 CBK RING
DEFAULT DATA
Item
STN RING
TRK RING
DOOR RING
ALM RING
CBK RING
ACTION
1. Press Transfer button and enter 510.
Display shows:
2. Dial cadence number from above list (e.g., 3)
OR
Press Volume button to select
Press Left Soft button and advance to step 3.
3. Dial new value for interrupt times.
(must be four digits)
Press Right Soft button to advance cursor.
Press Left Soft button to retreat cursor.
If valid entry, system returns to step 2.
4. Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
Samsung Business Communications
Item
This is the cadence intercom calls will ring at.
This is the cadence trunk calls will ring at.
This is the cadence door phone calls will ring at.
This is the cadence alarm reminder calls will ring at.
This is the cadence callbacks will ring at.
ON
1000
0400
0400
0400
1000
OfficServ 7200 Programming Guide
Description
OFF ON
3000 1000
0200 0400
0100 0400
0200 0400
4000 1000
1:STN RING :0400
0200 0400 3000
3:DOOR RING:0400
0100 0400 2000
3:DOOR RING:0100
9900 0100 9900
(unit: milliseconds)
OFF
3000
2000
2000
3000
4000
DISPLAY
2-158