Samsung OfficeServ 7200 Programming Manual page 338

CHAPTER 2. MMC Programming
CONDITIONS
This MMC must be used if there are ITP phones and/or MGI cards on the system.
After changing Ethernet parameters, restart the system to apply the new settings.
DEFAULT DATA
SYSTEM IP ADDR: 165.213.97.185
SYSTEM GATEWAY: 165.213.97.1
SYSTEM NET MASK: 255.255.255.0
SYSTEM RESET: NO
SYSTEM IP TYPE: PRIVATE IP ONLY
SYSTEM PUBLIC IP: 1.1.1.1
SYSTEM DHCP MODE: STATIC
SYSTEM MAC ADDR: CARD DEPENDENT
DATA SERVER IP: 0.0.0.0
FEATURE SVR IP: 0.0.0.0
PCMMC ADDRESS: 168.219.1.101
SM MANAGER IP: 0.0.0.0
CTI SERVER ADDR: 0.0.0.0
NEWS ADDR: 0.0.0.0
Samsung Business Communications
ETHERNET PARAMETERS
- The first three parameters: SYSTEM IP ADDR, SYSTEM GATEWAY, and SYS-
TEM NET MASK are stored separately from the main system database and thus
will not be defaulted when MMC811 'CLEAR MEMORY' is performed. Further-
more, any changes to these parameters will not be applied until the MCP2 is re-
set.
- When changing any IP address/value, three digits must be entered for each (oc-
tet) field. For example 192.168.1.10 should be entered as: 192 168 001 010.
OfficServ 7200 Programming Guide
2-307