Table of Contents
Advertisement
Setting up IP Routing Information
1
From the user interface of the D9824, click System Settings > System, expand IP
Settings and then click IP Routing. The IP Routing page is displayed.
2
In the MPE Data Filter Model drop-down, set whether all the MPE data is
forwarded to the network (Forward None or Forward All). It can forward up to 5
MPE PIDs.
Note: This can only be configured on Port 2. Port 1 and 3 are fixed to Forward
None.
Note: The receiver supports up to a maximum of 10 Mbps throughput when
forwarding 1500 byte packets.
3
The Static Unicast Routing and the Static Multicast Filtering sections are not
supported in the current release.
4
Click Apply.
78-4039426-01 Rev D
Configuring System Settings
189
- Quick Links:
- Logging on to the Web Interface
Hide quick links:
Advertisement
Table of Contents
