Control, Management And Data Interfaces; Ethernet Management Interface; Alarm Interface; Contact Closure Interface - Cisco D9824 Installation And Configuration Manual

Control, Management and Data Interfaces

Ethernet Management Interface

Item
Number of connectors
Type of connector
Ethernet type
Required setup

Alarm Interface

Item
Number of outputs
Type of connector
Max. voltage
Max. current

Contact Closure Interface

Item
Connector type
Minimum duration of event
guaranteed to be detected
Max. on generator impedance 100 ohms
Min. off generator impedance 100 kilohms
78-4039426-01 Rev D
Specification
1
Eight-pin RJ-45
100/1000 BaseT
IP address, default gateway and subnet mask
Specification
1, with one set of contacts closed and one set
open during normal operation.
15-pin sub-D female
40 V peak
0.5A
Specification
15-pin sub-D female
250 ms, 1 frame period, e.g., for 1080i/25 Hz 40
ms for DPI applications

Control, Management and Data Interfaces

277