Cisco D9824 Installation And Configuration Manual page 253

Alarm Message
Type
Shutdown Set
Event
Shutdown Set
Event
Shutdown Set
Event
Shutdown Set
Event
78-4039426-01 Rev D
Message Cause/Remedy
User requested Cause: User
service restore request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify
customer service if
the problem
persists.
PRODUCTION - Cause: User
Protect Flash request requires
reboot or internal
system error.
Remedy: If it is an
internal system
error fault, clear
alarms, reset the
unit, notify
customer service if
the problem
persists.
I2C Failure Cause: Possible
software/hardwar
e issue.
Remedy: Clear
alarms, reset unit,
notify customer
service if problem
persists.
WDOG: FPGA not Cause: Possible
loaded software/hardwar
e issue.
Remedy: Clear
alarms, reset unit,
notify customer
service if problem
persists.
D9824 Alarm Messages
Description Severity
Restore Major
operation
required restart
Reboot after Major
production
tables
removed.
Internal system Major
error.
FPGA has not Major
been loaded.
231