Status Menu: Ts Output - Cisco D9824 Installation And Configuration Manual

Chapter 4 Front Panel Operation
Menu Item
SR Event Type
SR Event Start
SR Event End

Status Menu: TS Output

Menu Item Description
Output Indicates the output type.
Rate (Mbps) Indicates the current output bit rate.
Free (Mbps) Indicates the available bandwidth, in Mbps
(without stuffing).
50
Description
Indicates the type of service
replacement event.
Displays the start time of the
service replacement event when
one is scheduled; otherwise, the
default start time is displayed. The
default start time is 2007/09/01
00:00:00.
Displays the end time of the service
replacement event when one is
scheduled; otherwise, the default
end time is displayed. The default
end time is 2007/09/01 00:00:00.
Parameters
None - Indicates that no service
replacement event is scheduled.
Scheduled - Indicates that all receivers
will tune to the alternate program at the
scheduled time. This setting is
applicable to PE1 to PE32 programs.
CA - Indicates that only receivers
unauthorized to view the scheduled
program will tune to the alternate
program according to the selected
authorization tier bits. This setting is
applicable to PE1 to PE32 programs.
Cue Trigger - Indicates that only
receivers authorized by the Cue Trigger
mask will tune to the scheduled
program/event.
Note: The Cue Trigger service
replacement event type is not
supported in the current release.
Parameters
ASI or MPEGoIP
0 to 213 Mbps
78-4039426-01 Rev D