Cisco D9824 Installation And Configuration Manual page 275

Warning Message
Type
Transport Error Set
Transport Error Set
Transport Error Set
Transport Error Set
Transport Error Clear
Transport Error Clear
Transport Error Clear
78-4039426-01 Rev D
Message Cause/Remedy
Continuity Count Cause: Possible uplink
Error or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify customer
service if the problem
persists.
Buffer Overflow Cause: Possible uplink
or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify customer
service if the problem
persists.
Transport Error Cause: Possible uplink
Indicator or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify customer
service if the problem
persists.
Transport Rate Cause: Uplink settings
Error: FPGA may have changed since
Overflow setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and/or
drop programs not
needed for downstream
devices. Contact your
(uplink) service provider
to verify the expected bit
rate settings.
Continuity Count
Error Cleared
Buffer Overflow
Cleared
Transport Error
Indicator Cleared
D9824 Alarm Messages
Description
Transport packet
continuity count
jumped. Possible
packet loss.
The transport stream
is faster than the
maximum buffer or
the decode engines are
having difficulty
handling the data sent
to them.
Transport packets are
marked as "errored"
upstream of the
decoder.
The output rate is
higher than level set
by the user.
Trap expires after 30
seconds.
Trap expires after 30
seconds.
Trap expires after 30
seconds.
253