Cisco D9824 Installation And Configuration Manual page 83

Menu Item
Orbital Position
Validation Date
Freq (GHz)
SymRate
FEC
L-Band
RF Lock
Modulation
Rolloff
78-4039426-01 Rev D
Description
This displays the last date that the 'Validate
Orbital Position' operation was performed.
This is the current Downlink operating
frequency used by the receiver for tuning the
received digital signal.
This is the symbol rate. The symbol rate must
match that of transmitted signal.
Select the Forward Error Correction inner code
rate. The FEC must match the FEC of the
transmitted signal.
This is the L-Band operating frequency used by
the receiver. This value is determined by the
values set in the Freq and LO options.
Indicate whether the tuner has locked onto the
Radio Frequency signal with the current
settings.
Sets the modulation type for the received
signal.
Sets the rolloff factor of the incoming signal.
Setup Menu
Parameters
N/A
0.0 to 15.0 GHz
1.0 to 45.0 Ms/s for DVB-
S.
1.0 to 30.0 Ms/s for DVB-
S2 if Pilot Present is set to
Yes.
5.0 to 30.0 Ms/s for DVB-
S2 if Pilot Present is set to
No.
1/2, 2/3, 3/4, 5/6, 7/8, or
Auto
950 to 2150 MHz
Lock or NoLock
DVB-S or DVB-S2
.20, .25, .35. Use .20 or .35
when DVB-S modulation
is used, and either of the
three when DVB-S2 is
used. Use a small number
to reject or filter carriers
close to the same
frequency.
61