Cisco D9824 Installation And Configuration Manual page 116

Chapter 4 Front Panel Operation
Menu Item
Dst Port
SrcPort
Send SAP
SAP ID
User SAP
Identifier
TS Out - DPM
To view the DPM menu from the TS Out menu, press the RIGHT arrow key. The
DPM menu provides access to functionality associated with Global and ASI outputs.
The DPM menu allows you to groom functionality on a program basis where
individual service PID modifications are provided on a limited scale.
Use the digital program mapping features to:
configure the transport output bit rate

configure the output mode for a program entry

configure the service and PID output settings in a program entry

Note: Any changes made to the ASI DPM values will automatically change the TS
Output mode to Full DPM Control.
94
Description
This selects the destination
port number.
This selects the source UDP
port number.
This selects whether to send
Session Announcement
Protocol (SAP) messages.
This selects whether to send
the user configured string,
defined in the User SAP
Identifier, as the output
stream name in a SAP
announcement.
This is the SAP string.
Note: If the SAP ID is set to
No, the User SAP
Identifier is not used.
Parameters
1 to 65535
Note: If you selected RTP for MOIP, you
must select an even destination port number.
0 to 65535
Yes or No
Yes or No
Up to 49 characters
78-4039426-01 Rev D