Setting Up Closed Caption Mode - Cisco D9824 Installation And Configuration Manual

Chapter 5 Web GUI Setup and Monitoring

Setting up Closed Caption Mode

1 From the user interface of the D9824, click Audio & Video > Audio & Video,
expand Video Decoding and then click Captions. The Captions page is
displayed.
2 In the Preferred Closed Caption Mode, select the type of closed captioning to
use if there are multiple available in the stream. The default is Auto.
Note: SA Custom is not supported when telecine video coding is enabled.
3 The Closed Caption Mode in the Status section displays the actual closed
caption mode in the output. This is read-only.
4 Click Apply.
154 78-4039426-01 Rev D