Cisco D9824 Installation And Configuration Manual page 113

Menu Item
Descramble Mode Select whether the output
Insert Null Packet Select whether to insert null
MOIP1
Menu Item
Name
Rate Control
User Rate (Mbps) This parameter controls the
78-4039426-01 Rev D
Description
will be descrambled if the
input is scrambled.
packets into the output to
maintain output at a
constant bit rate.
Description
This is the name assigned
to the transport output for
ease of reference.
This is the DPM output rate
control.
output rate when Rate
Control is set to User.
Note: Output data will be
partially or completely lost
if the user-selected bit rate
is set to a value that is less
than the actual signal bit
rate.
Parameters
Scrambled - The output channel will remain
scrambled even if the PE is authorized and
can descramble the channel.
Descrambled - Descrambles the output
channel, and passes in-the-clear channels.
The default is Descrambled.
Yes or No
Parameters
20-character string
Auto - The output rate follows that set by the
uplink. The output rate will be the same as
the input rate (including all null packets).
This means the output bit rate is determined
automatically based on the input source
symbol rate and FEC value. This setting is
used when the signal source is RF.
User - The output rate is specified as the
Output Rate parameter. It is determined by
the user setting regardless of the input
source. Null packets are always inserted.
0 to 206 Mbps
Setup Menu
91