Status Menu: Ts Input - Cisco D9824 Installation And Configuration Manual

Chapter 4 Front Panel Operation

Status Menu: TS Input

Input
Menu Item
Input
Status
Rate (Mbps)
Level (dBm)
SymRate
FEC
Modulation
Pol
IQ Tuner
IQ Status
Dnlk Freq (GHz)
L-Band
46
Description
Indicates the active input port receiving
the signal.
Indicates the current signal lock status
for the input.
Indicates the bit rate of the received
input signal.
Indicates the signal level of the received
signal.
Indicates the Symbol Rate of the
received signal.
Indicates the FEC (Forward Error
Correction) rate of the received signal.
Indicates the modulation type for the
received signal.
Indicates the signal polarization setting.
This setting is only applicable when
LNB Power is set to H-NIT or V-NIT.
The selected setting must match the
polarization of the transmitted signal.
Indicates the IQ (Input Signal Inversion)
for the received signal.
Indicates the input signal spectrum
inversion setting (IQ), which allows the
operator to track and select inverted
and non-inverted digital signals.
Indicates the current downlink
frequency.
Indicates the current L-Band frequency. in MHz
Parameters
RF1, RF2, RF3, RF4, or ASI
Locked - Indicates the receiver is
locked to a carrier with no valid
content.
Lock+Sig - Indicates the receiver is
locked to a carrier with valid
content.
No Lock - Indicates the receiver is
not locked to a carrier.
in Mbps
in dBm
in Msymbols/second
N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
7/8, 8/9 or 9/10
N/A, QPSK, 8PSK, DVB-S, DVB-
S2 or 16QAM
Horiz (Horizontal), Vert (Vertical)
or Auto
Inv or NonInv
Auto, Opposite, or Normal
in GHz
78-4039426-01 Rev D