Cisco D9824 Installation And Configuration Manual page 166

Chapter 5 Web GUI Setup and Monitoring
If you set by
PID ID
Stream Type
Stream Type: User
14 If you know the PID number, ensure that PID is selected under Mode and enter
the appropriate PID number. Click Save.
15 To enter the stream type, select Stream under Mode, select the stream type in the
Stream Category (VID, AUD, SUBT, USER, or TTX) and enter the instance of the
stream type in Stream Instance. You can enter a range from 1 to 64. Click Save.
16 If you do not know the stream type, you can specify a specific hex value as the
stream type. Select Stream under Mode, select User under Stream Category,
enter the hex value of the stream under Stream Type Value and the instance of
the customized stream type in Stream Instance. You can enter a two digit
hexadecimal value for the Stream Type and a range from 1 to 64 for the Stream
Instance. Click Add.
17 To delete a record, select the record you want to remove and click Delete.
18 The System ID section displays the system name and ID number of the CAM for
the top/bottom slots.
144
Parameter Settings
Set Mode to PID and enter PID number.
Set Mode to Stream, select Stream Category (AUD, VID, SUBT, TTX,
or USER) and enter Stream Instance of the stream type.
There is an additional configuration if you select user as the Stream
Category (see below).
Set Mode to Stream, Stream Category to User, manually enter the
stream code in Stream Type Value, and then the Stream Instance of
the stream type.
78-4039426-01 Rev D