Configuring The Mpegoip Output - Cisco D9824 Installation And Configuration Manual

29 Select the tables which will be passed, dropped, regenerated or passed with rate
control (PwRC) from the ASI Output. The CDT table is different from the other
tables listed. For more information on the table options, see PSI Table Settings
(on page 100).
30 Click OK.
31 Click Apply.
If a conflict occurs, a detailed error message appears at the top of the page. You
must resolve the conflict and then click Apply to save and apply your changes
again

Configuring the MPEGoIP Output

1 From the user interface of the D9824, click Transport Stream > Transport
Handling > MPEG over IP Output. The MPEG over IP Output page is
displayed.
78-4039426-01 Rev D
Configuring Transport Stream Information
173