Cisco D9824 Installation And Configuration Manual page 122

Chapter 4 Front Panel Operation
Menu Item
PID
Act
OutType
In
PID
PSI Table Settings
Note: The table settings are only available if you selected Ctl by Table in the PSI
Options menu.
Setting
PAT
CAT
PMT
TSDT
NIT
100
Description
Displays the input PID that will
be mapped by the current
entry. This value is read-only
and for reference purposes.
Select the action to perform on
the current PID.
The Drop action is always
performed, but the Map option
is only applied if the PE action
is Map and the Map Mode is
Svc ID & PID.
Select the service to configure.
If an input service matches this
type and instance specified by
In, then the Action will be
applied.
Select the instance of the service
specified by OutType to
configure. If an input service
matches this type and instance,
then the Action will be applied.
If mapping this PID (Act is set
to Map), select the output PID
number.
Mode Options
Pass, Drop, Regen
Pass, Drop, Regen
Pass, Drop, Regen
Pass, Drop
Pass, Drop, Regen, PwRC Network Information
Parameters
1 to 8190
Map - The service selected by the
OutType and Instance will be
mapped to the specified PID. This is
only applied if the PE action is Map
and the Map Mode is Svc ID & PID.
Drop - The service selected by the
OutType and Instance will be
removed from the PMT and the
output stream.
UNKN, ETV, CDT, LSDT, DATA,
TTX, MPE, DPI, VBI, SUBT, AUD,
VID, PCR or INVL
1 to 64
1 to 8190
Description
Program Association
Table
Conditional Access Table Pass
Program Map Table
Transport Stream
Description Table
Table
Default
Pass
Pass
Pass
Pass
78-4039426-01 Rev D