Loading A Software Version - Cisco D9824 Installation And Configuration Manual

Chapter 5 Web GUI Setup and Monitoring

Loading a Software Version

From the user interface of the D9824, click Support > Service Actions > Service
Actions. The Service Actions page is displayed.
The S/W Version drop-down list allows you to select/load a different application
version to your receiver. Click Select & Reboot to load the selected application
version and reboot the receiver.
Click Erase to remove the selected application version. You will be prompted to
continue or not. Press OK to continue the deletion.
Click Factory Reset to perform a reset of receiver settings back to the factory set
(default) values. A warning message prompts you to confirm the operation. Click
OK to continue or No to cancel the operation.
Click Reboot Receiver to reboot the receiver. You will be prompted to verify the
operation. Click Yes to reboot the receiver or No to cancel the operation.
To Change the Download Application
In the Download APP section, click Browse to select the new version of FPGA or the
D9824 Advanced Multi Decryption Receiver's software application. The Choose File
dialog opens. Select the upgrade file and click Open. Click Download to download
the selected upgrade file. File formats that can be downloaded include Application
CDTs and FPGA CDTs
216 78-4039426-01 Rev D