Cisco D9824 Installation And Configuration Manual page 260

Chapter 6 Service and Maintenance
Alarm Message
Type
Shutdown Set
Event
System Startup Set
SMI Setup Set
SMI Setup Set
SMI Setup Clear
SMI Setup Clear
238
Message Cause/Remedy
Watchdog 'AAA' Cause: Possible
has expired software issue.
Remedy: Clear
alarms, reset unit,
notify customer
service if problem
persists.
System Startup Cause: The unit
has started up and
it indicates an
expected or
unexpected reset.
Remedy: If a
startup was
unexpected, check
for last reset cause.
Notify customer
service if problem
persists.
Phase lock error Cause: Hardware
on SMI SDRAM Issue.
Remedy: Clear
alarms, reset the
unit, and notify
customer service if
the problem
persists.
SMI SDRAM Cause: Hardware
exhaust test failed Issue.
Remedy: Clear
alarms, reset the
unit, and notify
customer service if
the problem
persists.
SMI SDRAM
setup successful
SMI SDRAM
exhaust test
passed
Description Severity
Software Major
detected an
error in
operation.
Indicates that Major
the decoder has
started up. This
alarm will clear
itself after one
second.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI bus not
working.
SDRAM on Major
SMI Bus OK.
SDRAM on Major
SMI Bus OK.
78-4039426-01 Rev D