Cisco D9824 Installation And Configuration Manual page 125

Parameter
PMT
TSDT
NIT
NITO
SDT
SDTO
BAT
EIT
TDT
RST
TOT
DIT
SIT
ECM
EMM
DRT
CDT
10 Press MENU three times to exit the TS Out menu and save the data. If the
changes cannot be saved/made, a message will be displayed indicating "Bad
configuration data". The following options are available: Abandon, Exit or
Return. Select Return to re-enter the parameter.
Note: When remapping an input program channel to an output channel, ensure
that the PIDs are mapped to different PIDs to avoid PID collisions.
Synchronizing Output Services
To synchronize the output to the input Services Only:
This operation synchronizes the inputs to the outputs according to the service
assignments only. This is useful when you already have PID assignments set for the
services but want to ensure that the services are mapped correctly.
1 On the DPM menu, map the output services as desired.
2 Select PE Resync: Svcs. The receiver will synchronize the PE output according to
the available input services only, and ignore the input to output service PID
mapping.
78-4039426-01 Rev D
Description
Regen
Drop
Regen or Drop
Drop
Regen
Drop
Drop
Drop
Pass
Pass
Pass
Pass
Pass
Drop
Drop
Drop
Drop
Setup Menu
103