R
EDK Tutorial and Demonstration
Introduction
This chapter contains basic instructions for using the EDK tools with the ML40x
Embedded Processor Reference System. It is designed to help illustrate the steps to build
and download the design. Information about demonstration software applications is also
provided. The instructions that follow provide only an overview of the capabilities of EDK.
Much more detail about operating the EDK tools can be found in the EDK documentation.
This chapter assumes that the reference design and all other necessary tools are properly
installed.
Instructions for Invoking the EDK tools
This tutorial section and those that follow have directory path names that are shown
separated by the "/" character as per the UNIX convention. For Windows, the "\" should
be used to separate directory paths.
The instructions that follow reference the <EDK Project Directory> located at:
•
•
•
•
These are the areas where the EDK Xilinx Microprocessor Project (XMP) files reside after
installing the ML40x Embedded Processor Reference System.
ML40x EDK Processor Reference Design
UG082 (v5.0) June 30, 2006
ML401
♦
MicroBlaze: <Reference Design Install Directory>/projects/ml401_emb_ref/
ML402
♦
MicroBlaze: <Reference Design Install Directory>/projects/ml402_emb_ref/
ML403
♦
MicroBlaze: <Reference Design Install Directory>/projects/ml403_emb_ref/
♦
PPC405: <Reference Design Install Directory>/projects/ml403_emb_ref_ppc/
ML405
♦
MicroBlaze: <Reference Design Install Directory>/projects/ml405_emb_ref/
♦
PPC405: <Reference Design Install Directory>/projects/ml405_emb_ref_ppc/
www.xilinx.com
Chapter 3
35