Samsung DCS Technical Manual page 84

SAMSUNG DCS
TECHNICAL MANUAL
MMC 312:
DESCRIPTION:
Allows the system administrator or technician to either:
⇒ allow or prevent receipt of CLIP data from the network
OR
⇒ allow or restrict sending of CLIP data, including type of data, to the network.
Each keyset can have the following options:
SEND: YES
NO
RCV:
YES
NO
INFO: CLIP data to be sent to the network
0. C.O Tel. – as defined in MMC 405
1. Ext Number – Not used
2. C.O Tel+Ext Number – not used
3. DID number – area code in single digit format (no leading 0) must be programmed in
MMC 718
ACTION
1. Press TRSF 312
Display shows
2. Dial STATION NUMBER (eg., 205)
OR Press UP or DOWN to select station
and press right soft key to move cursor
Press ANS/RLS to select all
3. Dial 0 or 1 to select option
Press UP or DOWN to select option
and press right soft key to return to move
cursor to INFO field
4. Dial 0-3 to select option
Press UP or DOWN to select option and
press right soft key to move the cursor
to step 2
5. Press TRSF to store and exit
OR
Press SPK to save and advance to next
MMC
DEFAULT DATA :
RELATED ITEMS:
Page 84 of 287 Updated I&M
- request the network to send Caller ID when outgoing call is made.
- request the network NOT to send Caller ID when outgoing call is made.
- allow display of CID data at LCD 24B and LCD 12B keysets.
- prevent display of CID data at LCD 24B and LCD 12B keysets.
OR
OR
OR
OR
CLIP ALLOWED
MMC 119 CLIP Display
PROGRAMMING
Allow CLIP
DISPLAY
[201] CLIP
RCV : YES SND: YES
[205] CLIP
RCV : YES SND: YES
[ALL] CLIP
RCV : YES SND: YES
[205] CLIP
RCV : NO SND: YES
[205] ALLOW CLIP
INFO: C.O Tel.
[ALL] ALLOW CLIP
INFO: C.O Tel.
May 2002
SECTION