Samsung DCS Technical Manual page 149

SAMSUNG DCS
TECHNICAL MANUAL
MMC 509:
DESCRIPTION:
Allows the technician to program the DCS system so that it recognises tones sent from the analog Trunk
Network on a system-wide basis. There are three(3) types of tones available through this MMC.The control of
the tone cadence may be changed from interrupt tone to continuous tone.
Changing these values may violate Austel Regulations.
The tones are mainly used in conjunction with the Automatic Redial Feature.
When busy tone is detected from the Network, the call will be automatically released and will be queued for
next trial after expiration of Auto-redial Interval Timer (MMC 501).
FEATURE KEYS
OPTIONS KEY
0 CONTINUOUS TONE
1 INTERRUPT TONE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
TONES
BUSY TONE RGBACK TONE
ACTION
1. Press TRSF 509
Display shows
2. Press UP or DOWN key to select tone
Press LEFT soft key and advance to step 3
3. Press UP or DOWN key to
select tone control
Press RIGHT soft key to advance to step 4
Press LEFT soft key to return to step 2
Page 149 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
DIAL TONE
OR
PROGRAMMING
CO Tone Cadence
DISPLAY
CO BUSY TONE
INTERRUPT TONE
CO RGBACKTONE
INTERRUPT TONE
May 2002
SECTION