Samsung DCS Technical Manual page 148

SAMSUNG DCS
TECHNICAL MANUAL
MMC 508:
DESCRIPTION:
Allows the System Administrator to program Call Cost parameters so the Call Cost can be calculated from
number of Meter Pulses received by the DCS from the Network. The Call Cost can be displayed on the LCD
during a call or as an SMDR record. Attributes are listed below.
0. UNIT COST PER MP
1. CALL COST RATE
Beware of changing this value when there is a being progressed CO
line under MP detection may result in inaccurate call cost.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 508
Display shows
2. Dial 0 or 1
Press UP or DOWN key for selection and
press RIGHT soft key to move cursor
3. Enter new value (eg., 111 for 111 percent)
System returns to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 148 of 287 Updated I&M
This value is multiplied by the number of Meter Pulses to calculate Call Cost.
The CALL COST is multiplied by this value to give final Call Cost.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
OR
OR
UNIT COST PER MP
CALL COST RATE
MMC 110 CALL COST DISP
MMC 414 MPD/PRS
WARNING !!!
DISPLAY
UNIT COST PER MP
0200 CENT
UNIT COST PER MP
0200 CENT _
CALL COST RATE
100 %
CALL COST RATE
111 % →
200 CENT (K)
100 PRECENT
PROGRAMMING
SECTION
Call Cost
111
May 2002