Samsung DCS Technical Manual page 283

SAMSUNG DCS
TECHNICAL MANUAL
MMC 812:
DESCRIPTION:
This MMC applies to the DCS 24, DX408, DCS 70 and Version 6.X DCS software.
This MMC must be set by the installer before any other programming is
Allows the system installer to select system software country version. A RANGE OF COUNTRIES ARE
AVAILABLE. After using this MMC, the installer must restart the system to make the selection
effective.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
ACTION
1. Press TRSF 812
Display shows
2. Press UP or DOWN key to make selection and press RIGHT
soft key
3. Press UP or DOWN key to select Yes or No and press RIGHT
soft key
Warning: if you select Yes, this will restart the system
4. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NONE
RELATED ITEMS : NONE
Page 283 of 287 Updated I&M
carried out.
Used to scroll through options
Used to enter selections
Move cursor left and right
PROGRAMMING
SECTION
Country Code
DISPLAY
SET COUNTRY CODE
UK
SET COUNTRY CODE
AUSTRALIA
WARNING! RESTART
ARE YOU SURE?YES
May 2002