Samsung DCS Technical Manual page 207

SAMSUNG DCS
TECHNICAL MANUAL
MMC 721:
DESCRIPTION:
Prior to replacing or testing a station, the DCS provides a service tool which will minimise the accidental loss
of programmable keys on the DCS electronic keysets. Prior to replacing or testing a station, the data is saved
and then the station can be replaced with another station type or the keys can be reprogrammed to provide
other features. Once testing or replacement is completed, the data can be restored to the individual station,
providing the same type as the original is in place.
NOTE: This program is not to be confused with AUTO SET RELOCATE. This program is for saving and
restoring programmable keyset key data for the same keyset type at that port.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 721
Display shows
2. Enter desired station number (eg., 205)
Press UP or DOWN key to make selection
and press RIGHT soft key
3. Press UP or DOWN key to make function
selection (eg., SAVE)
4. Press RIGHT soft key to enter and return to
step 2
Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 207 of 287 Updated I&M
Save Station Key Programming
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
OR
OR
OR
NONE
MMC 107 KEY EXTENDER
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
PROGRAMMING
DISPLAY
[201] SAVE KEY
RESTORE
[205] SAVE KEY
RESTORE
[201] SAVE KEY
SAVE
May 2002
SECTION