Download Print this page

Samsung DCS Technical Manual page 117

Hide thumbs Also See for DCS:

Advertisement

SAMSUNG DCS
TECHNICAL MANUAL
MMC 419:
OptionsError! Reference source not found.
DESCRIPTION:
This MMC establishes the BRI options for the DCS/Compact systems for both BRI Trunks and BRI Stations
(extensions). For each BRA, two adjacent ports are assigned, therefore you only have to change the value for
one of the ports and the value for the other port will be changed automatically.
1. BRI TRUNK
BRI MODE
P-P DDI - Used when DDI is provided by the Network Provider. In this mode, calls can be directed to
a specific station or station group according to the DID NUMBER TABLE.
P-M MSN -Used when the BRA has been configured for MSN service by the Network Provider, (max.
8 terminals can be connected to BRA) calls can route incoming MSN number call to specific station
or station group according to MSN NUMBER TABLE.
P-P NOR or P-M NOR - Used when the BRA has been configured as a Normal service by the
Service Provider, calls can be routed according to Trunk Ring Assignment in MMC 406.
CHANNEL ANY
This field is referenced when a user tries to make an outgoing call. If CHANNEL ANY is programmed
YES - the system will allocate any a free BRA channel or port.
NO - the system will allocate the BRA channel or port selected even if the other BRA channel
is free. This option should be chosen if you wish to allocate specific channels to "Line" keys
or allocate specific extensions to tenants.
DLSEND
This field is provided to set the dial sending mode to "enbloc" or "overlap" on an individual port basis.
NOTES:
Changes to BRI MODE options are only effective only after the BRI Card has been restarted. Use
MMC 418 to restart the card.
DLRECV is not a programmable option in Version 4+ software
BRI EXTENSIONS.
If a BRI port is set to STATION mode IN MMC 423, the configuation options are
Channel Any -Yes/No Set the Channel Any option to NO. for Channel Ident IE as Exclusive
Power Feed - Yes/No. Generally only required when an ISDN telephone is installed.
NOTE The power feed option is only available on the DCS BRIN card.
BRI Options
BRI Trunk (BRI-TRK
Page 117 of 287 Updated I&M
BRI Mode
P-P DDI
P-P NOR
P-P MSN
P-M NOR
PROGRAMMING
BRI
DLSEND
OVERLAP
ENBLOCK
May 2002
SECTION
CHANNEL ANY
YES
NO

Advertisement

loading