Samsung DCS Technical Manual page 121

SAMSUNG DCS
TECHNICAL MANUAL
MMC 421:
DESCRIPTION:
Provides a method of assigning an incoming MSN call to a station.
If an entry in the MSN DIGIT TABLE matches the incoming call's called party number, then the programmed
station receives audible signalling if it is programmed to "Accept" the call.
OR
The call is cleared if the DCS is programmed to "Reject" the call.
If the Incoming called party number does not have a matching entry in MSN table, then the operator is
presented with the call.
Each MSN number can be assigned to a station. If the programmed destination is busy (eg station), there is a
programmable option to send busy tone to the caller or to camp the call to the busy destination.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 421
Display shows
2. Enter trunk number (eg., 704)
Press UP or DOWN key to scroll through
ISDN PORT
and press RIGHT soft key to move cursor
3. Enter the location (eg., 4)
Press UP or DOWN to select location and
press RIGHT soft key to move cursor.
Max. location is 8.
4. Enter in digits to be translated
(eg., 4603881)via dial key pad and press
RIGHT soft key to move cursor.
Max. digit is 10.
Page 121 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
PROGRAMMING
MSN Digit
DISPLAY
[701] MSN DGT (1)
→ NONE
[704] MSN DGT (1)
→ NONE
[704] MSN DGT(4)
→ NONE
[704] MSN DGT (4)
→ NONE
4602831_
May 2002
SECTION