Samsung DCS Technical Manual page 113

SAMSUNG DCS
TECHNICAL MANUAL
MMC 415:
DESCRIPTION:
Allows the system administrator or technician to enable or disable the reporting of abandoned CO calls for
which CLIP information has been collected on a per trunk basis.
There are two options for this MMC as follows.
0 REPORT : NO Abandoned call records for incoming calls with CLIP information will not be printed on
the SMDR or stored in the system call abandon list.
These records will continue to be stored in the station review list.
1 REPORT : YES Abandoned call records for incoming calls with CLIP information will be printed on the
SMDR or stored in the system call abandon list.
These records will also to be stored in the station review list.
Note :
In order for abandoned call records to be printed on SMDR, MMC 725 SMDR Options, Option 11 Print
Abandoned Call Records must be set to YES.
ACTION
1 Press TRSF 415
Display shows
2. Dial TRUNK number
Press UP or DOWN to select trunk and use
left or right soft key to move cursor
3. Dial 1 for YES OR Dial 0 for NO
Press UP or DOWN to scroll through options
and use left or right soft key to
return to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA : All TRUNKS will not report data
RELATED ITEMS:
Page 113 of 287 Updated I&M
Report Trunk Abandon Data
OR
OR
OR
MMC 119 CLIP DISPLAY
MMC 312 ALLOW CLIP
MMC 608 ASSIGN REVIEW BLOCK
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
MMC 725 SMDR OPTIONS
MMC 728 CLIP TRANSLATION TABLE
PROGRAMMING
DISPLAY
[701] TRK ABNDN
REPORT : YES
[704] TRK ABNDN
REPORT : YES
[704] TRK ABNDN
REPORT : NO
May 2002
SECTION