Samsung DCS Technical Manual page 242

SAMSUNG DCS
TECHNICAL MANUAL
MMC 733:
DESCRIPTION:
This MMC is used to build AA PLAN TABLE which consists of main factors, ie. system prompt messages,
decide to the next call flow according to the status of dialled party and assigning dialled digit translation table.
It will be assigned to a specific AA port or a group of AA ports through MMC 735.
There are a total of 64 messages on a AA board;
48 messages are to be recorded by the user (01-48),
16 messages are pre-recorded in ROM on the board (49-64).
It's attributes are as follows;
ATTR TITLE
0 DAY MSG
1 NIGHT MSG
2 ALTER MSG
3 INVLID MSG
4 NO ANS MSG
5 XFER MSG
6 BUSY MSG
7 NO STN MSG
8 NO ACT MSG
8 CAMP
9 ANS DELAY
10 RETRY CNT
11 TRANS TABLE
12 BUSY DEST
13 NO ANS DEST
14 NO ACT DEST
15 INVALID DEST
There are a total of12 tables (01-12) in the system.
DESTINATION : STATION, STATION GROUP, AA PLAN NO, REPEAT.
ACTION
1. Press TRSF 733
Display shows
2. Dial AA PLAN TABLE number
Press UP or DOWN
press RIGHT soft key
3. Dial attributes number
Press UP or DOWN
press RIGHT soft key
Page 242 of 287 Updated I&M
DATA COMSG
01-64 Introduction Message during Day Mode
01-64 Introduction Message during Night Mode
01-64 Emergency Message
01-64 Message when dialled invalid
01-64 Message on no answer reply
01-64 Transfer notifying Message
01-64 Message on busy reply
01-64 Message on retrial
01-64 Message on no action
Yes/No Allow Camp-on onto busy extension
01-10 Delaying until answer (sec)
0-5 Count for allowing retry on faulty
01-12 Assigning associated TRANS TABLE
DEST Alternative destination on busy
DEST Alternative destination on no answer
DEST Default destination on no action
DEST Default destination on invalid action
OR
OR
PROGRAMMING
AA Plan Table
DISPLAY
AA PLAN PROG (01)
DAY MSG : NONE
AA PLAN PROG (02)
DAY MSG : NONE
AA PLAN PROG (02)
NIGHT MSG : NONE
May 2002
SECTION