Samsung DCS Technical Manual page 116

SAMSUNG DCS
TECHNICAL MANUAL
MMC 418:
DESCRIPTION:
Enables any changes you make in MMC 419 (BRI Option), MMC 420 (PRI Option) or MMC 423 (S/T Mode)
and applies them, as appropriate, to each BRI or PRI card that you restart.
Note: In DCS and DCS Compact software version prior to version 6 the selection of the relevant ISDN
card to restart was selected by slot number.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 418
Display shows
2. Enter first trunk number on ISDN card (e.g. 701)
OR
Press UP or DOWN to select and press RIGHT soft key
3. Enter 1 for Yes or 0 for No
OR
Press UP or DOWN to select and press RIGHT soft key
(If you select No, system returns to step 2)
4. You are asked for confirmation:
Enter 1 for Yes or 0 for No
OR
Press UP or DOWN to select and press RIGHT soft key
(If you select Yes, the ISDN card is restarted)
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS:
Page 116 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
None
MMC 417 PRI CRC4 Option
MMC 419 BRI Option
MMC 420 PRI Option Not applicable to DCS Compact and DCS 24
MMC 423 S/T Mode
PROGRAMMING
Card Restart
DISPLAY
[701] RESTART
CARD RESTART ? NO
[701] RESTART
CARD RESTART ? NO
[701] RESTART
CARD RESTART ? NO
[701] RESTART
ARE YOU SURE ? NO
May 2002
SECTION