Samsung DCS Technical Manual page 281

SAMSUNG DCS
TECHNICAL MANUAL
MMC 810:
DESCRIPTION:
Used only in the event that all data processing is needed to be stopped either in a single cabinet or the entire
system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 810
Display shows
2a. Enter in cabinet selection via dial keypad
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor
2b. Press ANS/RLS to select all cabinets and all
slots
3. Enter in slot number via dial keypad
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor
4. Enter in 1 for HALT or 0 to PROC
Press UP or DOWN key to make selection
and press RIGHT soft key to enter data and
return to step 2
5. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 281 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
OR
OR
OR
OR
NONE
NONE
PROGRAMMING
Halt Processing
DISPLAY
HALT/PROCESSING
C: ALL S : ALL → PROC
HALT/PROCESSING
S : ALL → PROC
C: 3
HALT/PROCESSING
C: ALL S : ALL → PROC
HALT/PROCESSING
S : 5 → PROC
C: 3
HALT/PROCESSING
S : 5 → HALT
C: 3
May 2002
SECTION