Samsung DCS Technical Manual page 70

SAMSUNG DCS
TECHNICAL MANUAL
MMC 304:
DESCRIPTION:
Allow trunks the ability on a per-station basis to answer incoming Trunk calls, to dial out on Trunk or to do
both. If a station is set to NO Dial, the station will not have the ability to make a call. If the station is set to NO
Answer, the station cannot answer an incoming call on that Trunk.
NOTE: MMC 406 Trunk Ring Assignment overrides this MMC for the Answer option.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1 Press TRSF 304
Display shows
2. Dial the station number ( eg., 205)
Press UP or DOWN key to select station and
press RIGHT soft key to advance to step 3
3. Dial the trunk ID number ( eg., 704)
Press UP or DOWN key to select trunk and
press RIGHT soft key to advance to step 4
4. Press UP or DOWN key to select YES/NO
option
Dial 1 for YES or 0 for NO and press RIGHT
soft key to move cursor to ANS option
Press UP or DOWN key to select YES/NO
option
Dial 1 for YES or 0 for NO and press
RIGHT soft key to return to step 2
5. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 70 of 287 Updated I&M
Assign Extension/Trunk Use
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
OR
OR
OR
OR
DIAL = Yes
ANS = Yes
MMC 406 Trunk Ringing Assignment
MMC 722 Station Key Programming
MMC 723 System Key Programming
PROGRAMMING
DISPLAY
[201] USE [701]
DIAL : YES ANS : YES
[205] USE [701]
DIAL : YES ANS : YES
[205] USE [704]
DIAL : YES ANS : YES
[205] USE [704]
DIAL : NO ANS : YES
[205] USE [704]
DIAL : NO ANS :YES
May 2002
SECTION