Samsung DCS Technical Manual page 48

SAMSUNG DCS
TECHNICAL MANUAL
MMC 206:
DESCRIPTION:
Sets the type of barge-in that is permitted. Note to allow a station to be barged in on you must set that
Station's COS such that SECURE = NO, and the Barging station's COS OVERRIDE=YES
OPTION TYPE OF BARGE IN
0 NO BARGE-IN
1 BARGE-IN WITH TONE
2 BARGE-IN WITHOUT TONE
(See Note below)
Note: Selecting Option 2, Barge In without Tone will contravene Austel requirements and therefore
should not be selected.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 206
Display shows
2. Dial 0-2 to select barge-in type (eg., 2)
Press UP or DOWN to select barge-in type
and press RIGHT soft key
3. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 48 of 280 DCS & DX I&M
DESCRIPTION
Barge-in feature is unavailable regardless of a station 's barge-
in status.
Barge-in will have an intrusion tone and display at the barged-in
on station.
Barge-in is allowed. There is no barge-in tone or display at the
barged-in on station and the barging-in station will be muted
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
OR
OR
NO BARGE-IN
MMC 301 ASSIGN STATION COS
MMC 701 ASSIGN COS CONTENTS
PROGRAMMING
Barge-In Type
DISPLAY
BARGE IN TYPE
NO BARGE IN
BARGE IN TYPE
WITHOUT TONE
August 2001
SECTION