Samsung DCS Technical Manual page 137

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL SECTION
DISA NOANS DISC.:This timer controls the duration of time a DISA call is disconnected by force when called
party does not answer.
DISA PASS CHECK: This timer defines the time before the system clears the incorrect passcode counter.
DISPLAY DELAY TIMER: This timer controls the duration a display is shown in the LCD display. This timer
also controls the duration of time that error tone is heard.
DOOR LOCK RELEASE: This timer controls the time the door lock relay will be activated.
DOOR RING DETECT: This timer controls the time the Door Phone button must be pressed before the call is
recognised by the DCS system.
DOOR RING OFF TM: This timer controls the duration of ringing at the door ring destination before
automatically cancelling.
E-HOLD RECALL TM: This timer controls the duration of time a call is held exclusively at a station before
recalling.
EXT. FWD DELAY TM: This timer controls the External Call Forward feature which determines the duration a
station will ring before the call externally forwarded.
FIRST DIGIT TIME: This timer controls how long the system will wait for dialling to begin before dropping the
dial tone and returning the user to error tone.
HOK FLASH MAX TM: This timer monitors the duration of a hookswitch flash from an SLI Port to ensure the
flash is valid and is not line noise or an accidental hookswitch bounce (LONGEST DURATION).
HOK FLASH MIN TM: This timer monitors the duration of a hookswitch flash from an SLI Port to ensure the
flash is valid and not line noise or an accidental hookswitch bounce (SHORTEST DURATION).
HOOK OFF TIME: This timer controls the time before dial tone is sent to a single line station.
HOOK ON TIME: This timer sets the minimum amount of time that the system will recognise as an SLT hang
up.
INQUIRY RELEASE: This timer monitors the duration of the interaction of the soft key to determine when to
return the LCD back to a normal status. This timer affects only display phones.
INTER DIGIT TIME: This timer controls the grace period between dialling valid digits before dropping the call
and returning the user back to error tone.
KMMC DIGIT TIME: This timer controls the maximum period between programming actions while in a
programming session. When the timer expires, the DCS system automatically returns the system to secure
programming status.
LCR ADVANCE TIME: This timer controls the duration of time before selecting the next allowable route when
a station is allowed to route advance.
LCR INTER DIGIT: This timer controls the period between dialling valid digits before dropping the call and
returning the user back to error tone.
MCL DELAY TIME: This timer controls the time when the system should start transmitting Authorisation
code after sending MCL Access code.
OFF HOOK RING: This timer controls the duration of time between ring bursts to a user who has a camped-
on call.
OFF HOOK SELECT: This timer controls the period before placing a internal/external call as programmed in
MMCs 306 and 307.
Page 137 of 287 Updated I&M May 2002