Samsung DCS Technical Manual page 277

SAMSUNG DCS
TECHNICAL MANUAL
MMC 806:
DESCRIPTION:
Allows the pre-programming of a slot for a specific card. For example, after the system is installed and a new
Trunk B card is added, running this program will cause the system to accept the card for what it is and not for
what it is not.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 806
Display shows
2. Enter in cabinet number (eg., 3)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter in slot number (eg., 5)
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 277 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
OR
OR
OR
NONE
NONE
PROGRAMMING
Card Pre-Install
DISPLAY
CARD PRE - INSTALL
CABNET : 1 SLOT :1
CARD PRE - INSTALL
CABNET : 3 SLOT :1
CARD PRE - INSTALL
CABNET : 3 SLOT :5
May 2002
SECTION