Samsung DCS Technical Manual page 209

SAMSUNG DCS
TECHNICAL MANUAL
5. If required, enter extender (eg., 03)
Press UP or DOWN key to make selection
Press RIGHT soft key to return to step 2
6. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DCS 70
ACTION
1. Press TRSF 722
Display shows
2. Enter station number (e.g., 205)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key
If selected station has no AOM pair, go to step
4
3. Enter 0 for MAST, 1 for AOM1 or 2 for AOM2.
OR
Press UP or DOWN key to make selection and press
RIGHT soft key
4. Enter key number (e.g., 18)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key
OR
Press programmable button
5. Using table above, press dial key pad number to make
selection
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to advance cursor to step 5 to enter
extender, if required, or to return to step 2
6. If required, enter extender (e.g.,03)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to return to step 2
7. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS:
Page 209 of 287 Updated I&M
OR
OR
SEE BELOW
MMC 107 KEY EXTENDER
PROGRAMMING
[201] KEY PROG.
18 : NONE → GPIK 03
DISPLAY
[201] KEY (MAST)
01:CALL1 →
[205] KEY (MAST)
01:CALL1 →
[205] KEY (MAST)
01:CALL1 →
[205] KEY (MAST)
18:NONE →_
[205] KEY (MAST)
18:NONE →GPIK_
[205] KEY (MAST)
18:NONE →GPIK03
May 2002
SECTION