Samsung DCS Technical Manual page 160

SAMSUNG DCS
TECHNICAL MANUAL
MMC 601:
Applicable to DCS 24, DCS 70 and DCS 200 with Version 6 software installed
DESCRIPTION:
This program is similar to MMC 600 Assign Operator Group but this one is for stations only. With the DCS 70
Operator group group 500 is defined in this MMC also. The station groups that are available will provide
more flexibility in the usage of Uniform Call Distribution (UCD), AA GROUP and VM/AA applications. A
station, Common bell, and Ring Page can be in more than one group, but must all be the same ring type.
There is a maximum of 48 members per group in DCS and 30 members in DCS 70 except for unconditional
groups which are limited to 10 members.
NOTES:
1. A device for announcement if used must provide a hookflash and return the call back to the
group.
2. In DCS Compact/DCS 70 Systems: maximum 30 of members are allowed in one group.
3. In DCS 70 Systems a unconditional ring group has a maximum of 10 members.
4. UCD groups may only be assigned to the following groups - DCS 70 - 510-519 with a maximum
of 5 UCD groups, DCS 24 - 510-519 with a maximum of 3 UCD groups, DCS 200 – 520-529
with a maximum of 10 groups
GROUP TYPES:
0 NORMAL GROUP
1 VMAA GROUP
2 UCD GROUP
3 AA GROUP
4
CADENCE GROUP
Other possible entries:
3801–3820 COM. BELL
363-365
DCS 70
3601–3640 RING PAGE
FEATURE KEY
0 TYPE Group type (Normal, VM/AA, UCD, Cadence)
1 RING Ring mode
2 OVERFLOW Overflow time
3 GRP TRSF Group transfer time
4 NEXT PORT Overflow port
5 MEMBER Group member (eg., station 202)
RING MODES
0 SEQUENTIAL
1 DISTRIBUTE
2 UNCONDITION
PROGRAM KEYS
Page 160 of 287 Updated I&M
Can only have distribute or sequential ringing.
Has wrap-up capability.
Can only have distribute or sequential ringing.
When Cadence is installed it will create 529 as
a Cadence group. Cadence must use this
group. Cadence Lite will create 519 as a
Cadence group.
This device is a common bell relay on a Trunk A card.
Common relays are assignable in MMC 219
This device is ring over an external page zone output of a Trunk A
card.
The first idle station listed in the group will ring. If the first is busy, the next
idle station will ring.
The first call will ring the first station listed in the group. The next call will ring
the next station listed in the group.
All the stations listed in the group will ring, busy stations will receive off-hook
ring. MAXIMUM 32 STATIONS RINGING. 10 STATIONS ON DCS 70.
Assign Station Group
PROGRAMMING
SECTION
May 2002