Samsung DCS Technical Manual page 219

SAMSUNG DCS
TECHNICAL MANUAL
FWRD: FWRD:
GPIK: GPIK:
HDST: HDSET:
HPICK: HLDPK:
IG: IG:
INQ: INQUIRE:
ISPY: ISPY:
LCR: LCR:
LSTN: LISTN:
LNR: LNR:
MMPA: MMPA:
MMPG: MMPG:
MSG: MSG:
MUTE: MUTE:
NEW: NEW:
NIGT: NIGHT:
NND: NND:
NXT: NXT:
OHVA: OHVA:
OPER: OPER:
PAGE: PAGE:
PARK: PARK:
PAUSE: PAUSE:
PGPK: PGPK:
PMSG: PGMMSG:
REJT: REJECT:
RTRY: RETRY:
REVW: REVW:
SMSG: SETMG:
SG: SG:
SNR: SNR:
Page 219 of 287 Updated I&M
Forward. If only FWRD entered user will need to input forward option presented
on LCD activated via soft keys. An extender can be assigned to this key 1=All
2=Busy 3=No Answer 4=Busy/No Answer 5=Follow Me 0=Cancell call forward.
Group Pick Up. Allows calls ringing at a group to be picked up. An extender can
be assigned eg. GPIK 501.
DCS 70 ONLY. Headset Mode. Toggles keyset between Headset & Handset
mode. Key will light when headset mode is set.
Hold Pick Up. If a call is on hold the call can be retrieved by pressing this key
followed by the station number that put the call on hold or the held trunk
number.
In / Out of group. If only IOG is entered user must specify which group they
wish to log in/out of. An extender may be assigned to this key eg. IOG 501
Inquire. By pressing this key then entering a trunk number the user can read
the CLIP data for a held call on that trunk.
I Spy. By pressing this key then entering station passcode the user can then
enter another station number which is in conversation the display will read the
dialled number and give the options to either Barge in or Drop the call. Note:
the station passcode must be changed from default of 1234.
Lease cost route will be activated for call made after pressing this button.
Listen. When on a call using the handset, pressing this key enables the
speaker the mic remains muted.
Last Number Redial.
Meet Me Page Answer.
Meet Me Page.
Message Waiting Indication. NOTE: this key is not for VMS message indication.
Mute key. Key will light to indicate muted condition. Useful on Non display
keysets as mute on appears as a soft key option on LCD
Clears the call, allowing user to make another call.
Night. Allows access to night mode setting (note COS reliant) Lights steady
when system in night mode.
Name Number Display. Pressing this key whilst in conversation will toggle the
display between Tk # and time of call – CLIP name if any – CLIP number.
Next. Displays the CLIP name/number of call off hook ringing at busy station.
Off Hook Voice Announcement. Pressing this key after dialling a busy ext will
intrude on the conversation at the busy ext.
Rings assigned operator group. Default 500.
Page to be assigned with a valid page zone as extender eg. PAGE 1 (page
zone 1)
DCS 70 only. Call park / retrieve. Pressing this key places a call on hold in a
park slot; park slot can either be entered after pressing Park key or
programmed as a key extender.
Pause. Inserts a pause break in dialling digit stream.
Pick up Page Hold. When a user operates paging the TK call is put on hold
either manually or automatically depending on station on/off option set.
Pressing this key then a ext number which made the page or the TK number of
the parked call will pick up that call
Program Message. An extender may be programmed to specify a specific
message number.
Blocks an OHVA announcement at the keyset.
Retry on Busy. Only for PSTN TKs Retry is given as a soft key option on LCD.
CLIP Review. Review CLIP information of previous calls.
Set Message for ext.
Sets up call to Station Group. A group can be entered after pressing this key or
a specific group can be assigned as a key extender eg.SG 501
Saved Number Redial. Dials number previously saved by performing a number
save – SCROLL – CLIP – SCROLL – SAVE
PROGRAMMING
SECTION
May 2002