Samsung DCS Technical Manual page 46

SAMSUNG DCS
TECHNICAL MANUAL
MMC 204:
DESCRIPTION:
Determines whether the common bell relay contacts have an interrupted or continuous closure when
activated. If interrupted is chosen, the relay follows an internal CO ring pattern of one second closed followed
by three seconds open.
As default, all common bell relay pairs are assigned as 380X DCS, 381 Comp, 36X DCS 70, 362 DCS24 &
DX408
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 204
Display shows current setting
2. Dial common bell number
Press UP or DOWN key to make selection of
common bell numbers and press RIGHT
soft key to advance cursor
3. Dial 0 for continuous or 1 for interrupted
operation
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
above
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
DCS200 Version 6.x, DCS70,DCS24 &DX408 RELATED ITEM:
Note:
Page 46 of 280 DCS & DX I&M
Used to scroll through options
Used to enter selections
Move cursor
Used to store data and advance to next MMC
OR
OR
OR
CONTINUOUS
MMC 203 ASSIGN UA DEVICE
MMC 601 ASSIGN STATION GROUP
MMC 219 COMMON RELAY SERVICE TYPE
There is only one common bell circuit per Trunk A card. A second Trunk A
card would need to be installed for 3802 to be valid.
Common Bell Control
DISPLAY
[3801] COM. BELL
CONTINUOUS
[3802] COM. BELL
CONTINUOUS
[3802] COM. BELL
INTERRUPTED
PROGRAMMING
SECTION
August 2001