Samsung DCS Technical Manual page 115

SAMSUNG DCS
TECHNICAL MANUAL
MMC 417:
DESCRIPTION:
This option is used to enable/disable the CRC4 generation and checking. It is useful with some networks
which do not support CRC4 framing but only PCM30 framing. By default, the CRC option is ON.
NOTE: After changing this option, MMC 418 must be used to restart the card to make the change effective.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 417
Display shows
2. Press RIGHT soft key to move cursor under
slot number. Use UP or DOWN key to select
slot number
Dial slot number using keypad
(eg., slot number = 5)
3. Press RIGHT soft key to move.
cursor under ON
Use UP or DOWN key to select ON/OFF and
press RIGHT soft key to return to step 2 to
change the option for another card.
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Note: This MMC is not applicable to DCS/Compact System
Page 115 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
CRC4 ON
MMC 418 CARD RESTART
PROGRAMMING
PRI CRC4 Option
DISPLAY
PRI-TRK C:1 S:3
CRC4 : ON
PRI-TRK C:1 S:5
CRC4 : ON
PRI-TRK C:1 S:5
CRC4 : ON
May 2002
SECTION