Samsung DCS Technical Manual page 218

SAMSUNG DCS
TECHNICAL MANUAL
KEY ASSIGNMENT
PCMMC KCMMC
AAPL: AAPLAY:
AARC: AAREC:
AB: AB:
ABND ABAND
ACCT: ACCT:
ALM: ALARM:
ANS/RLS: ANS/RLS:
BARG: BARGE:
BLOK: BLOCK:
BOSS: BOSS:
CALL: CALL:
CAMP: CAMP:
CMSG: CANMG:
CBK: CBK:
CONF: CONF:
CID/CLIP: CLIP:
CS: CS:
CSNR: CNSR:
DICT: DICT:
DIR: DIR:
DLOK: DLOCK:
DND: DND:
DP: DP:
DROP: DROP:
DS: DS:
DT: DT:
FANS: FAUTO
FLSH: FLASH:
Page 218 of 287 Updated I&M
Play Auto Attendant messages
Record Auto Attendant messages
DCS 70 ONLY. Absent feature. When activated at a station display will read
ABSENT. DSS keys for that station programmed on other keysets will flash. It
is still possible to call stations in absent mode.
View abandoned call CLIP details Default password = 1234
Account code entry
Alarm ring answer key Passcode under TENANT/PASSCODES Alarm sensor
ring
DCS 70 ONLY. Answer / Release key
Executive Barge-in. Allow under TENENTS/BARGE IN TYPE. NOTE: Bargee
must have SECURE set to NO in COS and Barger must have OVERRIDE set
to YES in COS
OHVA block. Disable OHVA to station
Set up for BOSS or SEC. Allows intercom calls between parties, flashes on
SEC when BOSS sets DND, all calls to boss ext now divert to Sec.
Termination point for calls to keysets for C.O calls (if no DTS keys assigned),
Intercom calls and Indial calls. – 1
suggested that these remain.
Camp On. Useful on Non display keysets as Camp on appears as a soft key
option on LCD
Cancel Message. Cancels messages.
Call back. Useful on Non display keysets as Call back appears as a soft key
option on LCD
Conference. Bring in other parties (internal or external), to drop a party press
CONF or TRANS followed by their number.
Calling line identification presentation. Displays CLIP
DCS 70 ONLY. UCD Call Waiting Status. Provides flashing indication when
calls in UCD queue reach the number as set in MMC 500 UCD CS level
indication. This key must be programmed with an extender eg.510
CLIP Number Saved Redial. Whilst on an incoming call pressing this key will
save the CLIP number of the call, after terminating that call pressing this key
again will redial that CLIP number.
When on a call, pressing this key allows you to leave up to 3 messages, can be
recalled later when call is terminated.
Directory. Look up numbers stored in Personal/System/Station speed dials.
This key can have a extender 1=Personal 2=System 3=Station
Door Lock. Operates door unlock feature.
Do Not Disturb
Directed Call Pick up. Station number can be specified.
Transfer Call Drop.
Direct Station Select. Station number must be specified.
Direct Trunk Select. Trunk number must be specified.
Forced answer. When dialling another ext, on hearing ring tone pressing this
key will auto answer the remote called station setting up an intercom hands free
call.
Flash. Sends hookflash to C.O line.
DESCRIPTION
Feature Description
st nd
& 2 keys are CALL keys by default it is
PROGRAMMING
SECTION
May 2002