Samsung DCS Technical Manual page 14

SAMSUNG DCS
TECHNICAL MANUAL
MMC 103:
DESCRIPTION:
Allows a system administrator to change the answer mode of any keyset or add-on module. Each keyset or
add-on module can have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing the
ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer calls on the speaker phone.
When a CO line is transferred to a keyset in Auto Answer, the screened portion of the call will be Auto
Answer, but the keyset or add-on module (AOM) will ring when the transfer is made if the user has not
pressed the ANS/RLS key or lifted the handset.
2. VOICE: ANNOUNCE after a short attention tone, callers can make an announcement but the ANS/RLS
key or handset must be used to answer calls.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 103
Display shows
2. Dial keyset number (eg., 205)
Press UP or DOWN to select keyset
Press ANS/RLS to select all Stations
Press RIGHT soft key to move cursor
3. Dial 0, 1 or 2 to change ring mode
Press UP or DOWN to select ring mode and
press RIGHT soft key to return to step 2
above
4. Press TRSF to store and exit
Press SPK to store and advance
to next MMC
DEFAULT DATA:
RELATED ITEMS: MMC 111 KEYSET RING TONE
Page 14 of 280 DCS & DX I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
OR
OR
OR
ALL KEYSETS RING
RING FREQUENCY DEFAULT IS 5
PROGRAMMING
Set Answer Mode
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
[205] ANS MODE
VOICE ANNOUNCE
August 2001
SECTION