Samsung DCS Technical Manual page 110

SAMSUNG DCS
TECHNICAL MANUAL
MMC 412:
DESCRIPTION:
Used for programming the type of signalling when E&M tieline cards are installed. DCS200 & DCS70 only.
The type of signalling used must be identical for the equipment at both ends of the E&M link. For example
the DCS200 E&M card and the router.
The signalling condition types are as follows:
IMMEDIATE
IMMEDIATE
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 412
Display shows
2a. Enter desired trunk number (eg., 704)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
Press ANS/RLS to select all trunks
2b. Enter desired trunk type selection from
above list
Press UP or DOWN key to make selection
and press RIGHT soft key to
return to step 2a
3. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 110 of 287 Updated I&M
CONDITIONS
DELAYED
DELAYED
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
OR
OR
OR
OR
None
MMC 714 DID Number and Name Translation
PROGRAMMING
Assign Trunk Signal
WINK
WINK
DISPLAY
[701] TRK SIGNAL
IMMEDIATE START
[704] TRK SIGNAL
IMMEDIATE START
[704] TRK SIGNAL
WINK
May 2002
SECTION