Samsung DCS Technical Manual page 190

SAMSUNG DCS
TECHNICAL MANUAL
MMC 709:
DESCRIPTION:
MMC 709 is used to program PBX codes. If the outgoing Trunk has been designated as a PBX type Trunk
rather than a CO type Trunk See (MMC 401), the PBX codes are taken into account for Access Barring
purposes to ensure Access Barring operates correctly. There is a maximum of five (5) entries allowable.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 709
Display shows
2. Enter in index number (eg., 3)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter in via dial keypad the desired
access/feature code (eg., 9)
Press RIGHT soft key to enter and return
to step 2 and enter more entries
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
DCS 24, DCS 70 and DCS 200 Version 6.x software
Page 190 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
NONE
MMC 401 CO/PBX LINE
MMC 702 TOLL DENY TABLE
MMC 703 TOLL ALLOWANCE TABLE
MMC includes "SPECIAL CODE" entries – Maximum of 10 codes
Special codes are provided to enable correct TOLL RESTRICTION function
in the case of prefix's dialled to enable CO FUNCTIONS.
EG: 1414
1831
PBX Access Code
DISPLAY
PBX ACCESS CODE
1:
PBX ACCESS CODE
3: _
PBX ACCESS CODE
3: 9
AAPT toll prefix
PSTN CID withhold
PROGRAMMING
SECTION
May 2002