Samsung DCS Technical Manual page 203

SAMSUNG DCS
TECHNICAL MANUAL
MMC 716:
DESCRIPTION:
This MMC provides secondary network access code when the call is routed to the secondary network .
Maximum of 16 entries up to 10 digits in length.
NOTE: The second entry may be selected as a primary secondary network. By default, 132(MCL Digital
Access). If dialled digits are not matches to the entry in the LCR DIGIT TABLE (MMC 710) and started with 0,
then the network code in the second entry will be dialled out by the system prior to transmitting the dialled
digit.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 716
Display shows
2. Enter in index number (eg., 3)
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter the desired access in via dial keypad
Press RIGHT soft key to enter and return to
step 2 and enter more entries
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
DCS70 NOTE:
Page 203 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
1: 121
2: 132
3: 161
MMC 710 LCR DIGIT TABLE
MMC 711 LCR TIME TABLE
MMC712 LCR ROUTE TABLE
MMC 713 LCR MODIFY DIGIT TABLE
MM716 also has provision to assign SECONDARY CARRIER PIN #'s
CALL COST OPTION, & STATION PIN #'s NOT applicable to Australia
Network Access Code
DISPLAY
NETWORK CODE
1 : 121
NETWORK CODE
3 : 161
PBX ACCESS CODE
3 : 163
PROGRAMMING
SECTION
May 2002