Samsung DCS Technical Manual page 225

SAMSUNG DCS
TECHNICAL MANUAL
ACTION
1. Press TRSF 724
Display shows
2. Enter option number 0-7 (e.g., 4)
OR
Press UP or DOWN key to make selection and press RIGHT
soft key.
3. Using table above, press dial keypad number to make selection
OR
Press UP or DOWN key to make selection and press RIGHT
soft key to advance cursor
4. Enter digits (e.g., 68) via dial keypad
5. Press LEFT soft key to enter change and continue to make
changes
OR
Press RIGHT soft key to enter and return to step 2
If an error message appears indicating duplication of access
code:
Enter 1 for YES for change OR 0 for NO for no change
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DCS 70
DEFAULTS:
PORTS
STATIONS
TRUNKS
381-384 MISC 2 CARD
PAGE 1
PAGE 2
MOH 2
DCS 24
DEFAULTS:
PORTS
STN DIAL NUMBER :
TRK DIAL NUMBER :
AA DIAL NUMBER :
MISC DIAL NUM :
BGM : 371
Common bell : None
Loud bell : None ~
STNG DIAL NUMBER : 500 ~ 509
TRKG DIAL NUMBER : 0, 80 ~ 82
S0 STN DIAL NO.:
Page 225 of 287 Updated I&M
201/301-2XX-3XX
701-7XX
361-MOTHERBOARD
362-MOTHERBOARD
372 MISC CARD
201 ~ 216
701 ~ 710
AA : 381 ~ 384
External page: 361
7801~7816
PROGRAMMING
SECTION
DISPLAY
STN DIAL NUMBER
→
BASE01:201
FEAT DIAL NUMBER
AAPLAY:NONE→
FEAT DIAL NUMBER
DICT :NONE→_
FEAT DIAL NUMBER
DICT :NONE→68
SAME DIAL EXIST
CHANGE? Y:1,N:0
May 2002