Samsung DCS Technical Manual page 191

SAMSUNG DCS
TECHNICAL MANUAL
MMC 710:
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing call placement. this table
works in conjunction with LCR ROUTE TABLE, LCR TIME TABLE and LCR MODIFY DIGITS TABLE. There
is a maximum of 500 entries with a digit string length of ten numerical digits. The system will automatically
maintain entered digit strings in numerical order. The characters ∗ and # are also accepted, for use with
feature codes.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 710
Display shows
2. Dial LCR entry (eg 005)
Press UP or DOWN key to select entry
and press RIGHT soft key to move cursor
3. Enter LCR digit string via the dial key pad
and Press RIGHT soft key
Press LEFT soft key to return to step 1
4. Enter digit length (00 - 31)
Cursor will move to RT
Enter route selection (1-16)
Press LEFT soft key to return to length
value. Valid entry will return you to step 1
5 Press TRSF to store and exit
Press SPK to store and advance to next
MMC
Page 191 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
OR
OR
PROGRAMMING
LCR Digit Table
DISPLAY
LCR DIGIT (001)
DIGIT:
LCR DIGIT (005)
DIGIT: _
LCR DIGIT (005)
DIGIT: 305426
LCR DIGIT (005)
LENGTH : 10 RT : 01
May 2002
SECTION