Samsung DCS Technical Manual page 195

SAMSUNG DCS
TECHNICAL MANUAL
MMC 712:
DESCRIPTION:
The LCR ROUTE TABLE has the responsibility for the selection of a specific trunk group in the completion of
an outward bound call. This table works in conjunction with LCR DIGIT TABLE, LCR TIME TABLE, LCR COS
TABLE and LCR MODIFIED DIGITS TABLE. After the user dials a valid digit string, the system will use the
LCR ROUTE TABLE to select a specific predetermined trunk group. There is a maximum number of 16
routes available beginning with the ROUTE NUMBER 1. If more than one trunk group is available for call
completion, the system will use the first designated trunk group and then start to utilise succeeding trunk
groups. If all trunk groups are busy in a selected route, call queue will become active and allocate trunks as
they become available.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 712
Display shows
2. Dial LCR ROUTE index number 1-16 (eg 05)
Press UP or DOWN to selected index and
press RIGHT soft key to move cursor and
advance to next step 3
3. Dial TIME BAND index number 1-4 (eg., 2)
Press UP or DOWN to selected index and
press RIGHT soft key to move cursor and
advance to next step 4
4. Dial LCR COS number 1-8 (eg., 4)
Press UP or DOWN to selected COS and
press RIGHT soft key to move cursor and
advance to next step 5
5. Dial TRUNK GROUP access code 80-89
(eg., 81)
Press UP or DOWN to selected access code
and press RIGHT soft key to move cursor
and advance to next step 6
Page 195 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
OR
OR
PROGRAMMING
LCR Route Table
DISPLAY
LCR ROUTE (01 : 1)
C : 1 G : NONE M : - - -
LCR ROUTE (05 : 1)
C : 1 G : NONE M : - - -
LCR ROUTE (05 : 2)
C : 1 G : NONE M : - - -
LCR ROUTE (05 : 2)
C : 4 G : NONE M : - - -
LCR ROUTE (05 : 2)
C : 4 G : 81 M : - - -
May 2002
SECTION