Samsung DCS Technical Manual page 27

SAMSUNG DCS
TECHNICAL MANUAL
MMC 110:
DESCRIPTION:
Allows the system administrator to set any of the keyset features listed below.
0. AUTO HOLD
1. AUTO TIMER
2. HEADSET USE When on, this feature disables the hookswitch allowing a headset user to answer all
3. HOT KEYPAD
first lift the handset or press the SPK button.
4. KEY TONE
5. PAGE REJOIN
6. RING PREF.
7. CALL COST.
8. AME BGM
9. AME PSWD
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 110
Display shows
2. Dial keyset number (eg., 205)
Press UP or DOWN to select keyset and
press RIGHT soft key to move cursor
Press ANS/RLS for ALL
3. Dial option number from above list
Page 27 of 280 DCS & DX I&M
Automatically places an existing CO call on hold if a CALL button, trunk key or
trunk route key is pressed during that call.
Automatically starts the stopwatch timer during a CO call.
calls by pressing the ANS/RLS button.
When on, this feature allows the user to dial directory numbers without having to
Allows the user to hear a slight tone when pressing buttons on his/her set.
Allows the user to hear the latter part of page announcements if his/her keyset
becomes free during a page.
When off, requires the user to press the fast flashing button to answer a ringing call
after lifting the handset.
If enabled (ON), LCD shows real time call cost calculated based on Metering Pulses
arrived.
This feature selects whether a station using Answer Machine Emulation will hear
their personal greeting or BGM while callers are listening to the personal greeting. A
BGM source must be selected for this to work. (Not applicable to DCS24)
When this feature is set, a station user using Answer Machine Emulation can hear the caller's
voice after entering the station passcode.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
OR
PROGRAMMING
Keyset On/Off
DISPLAY
[201] STN ON/OFF
AUTO HOLD : OFF
[205] STN ON/OFF
AUTO HOLD : OFF
[ALL] STN ON/OFF
AUTO HOLD : OFF
[205] STN ON/OFF
August 2001
SECTION