Samsung DCS Technical Manual page 269

SAMSUNG DCS
TECHNICAL MANUAL
MMC 801:
DESCRIPTION:
Used to change the passcode allowing access to MMC 800 Enable Technician Program from its current
value.
NOTE: The passcode is four characters long. Each character can be digits 0-9 or *. The current or "old"
passcode is required for this MMC.
PROGRAM KEYS
KEYPAD
SPK
ACTION
1. Press TRSF 801
2. Enter new passcode
3. Enter new passcode again
4. If passcode is correct, press RIGHT soft key
to continue and enter desired MMC
5. If passcode is incorrect
6. System returns to step 2
7. Press TRSF to store and exit
Press SPK to advance to MMC
DEFAULT DATA:
RELATED ITEMS:
Page 269 of 287 Updated I&M
Change Technician Passcode
Used to enter passcodes
Save data and advance to next MMC
OR
DEFAULT PASSCODE = 4321
MMC 800 ENABLE TECHNICIAN PROGRAM
PROGRAMMING
DISPLAY
TECH. PASSCODE
NEW CODE : _
TECH. PASSCODE
NEW CODE : ∗ ∗ ∗ ∗
TECH. PASSCODE
: ∗ ∗ ∗ ∗
VERIFY
TECH. PASSCODE
VERIFY : SUCCESS
TECH. PASSCODE
VERIFY : FAILURE
TECH. PASSCODE
NEW CODE : ∗ ∗ ∗ ∗
May 2002
SECTION