Samsung DCS Technical Manual page 153

SAMSUNG DCS
TECHNICAL MANUAL
MMC 511:
Applicable to DCS 70 and DCS 200 with Version 6 software installed. Not applicable to DCS 24.
DESCRIPTION:
Provides the ability to customise the SLT Message Wait LED cadence. The default setting of interrupt
cadence is ON:1000 OFF: 1000.
To set continuous cadence should be set to. ON: 0000 OFF: 0000.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 511
Display shows
2. Dial in new value for interrupt times
(must be four digits)
Cursor will advance to OFF selection
3. Dial in new value for interrupt times
(must be four digits)
If valid entry, system returns to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
NOTE: All times are in milliseconds.
RELATED ITEMS:
Page 153 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
OR
ON: 1000 OFF: 1000
NONE
SLT Message Wait Cadence
DISPLAY
MW LAMP CADENCE
ON: 1000 OFF: 1000
MW LAMP CADENCE
ON: 3000 OFF: 1000
MW LAMP CADENCE
ON: 3000 OFF: 3000
PROGRAMMING
SECTION
May 2002